FUEL CELLS Bipolar Plates INSPECTION

modusAOI MCS42


The system comes with four 42 megapixel cameras and a high-performance control unit. LED lighting including LED control is also included in the delivery. The entire picture of the image analysis is orthogonally calibrated.

Characteristics

This system can meet the toughest requirements for the inspection of bipolar plates in various production stages

A modification to meet the stringent demands of bipolar plate inspection has been carried out.The total test time of approx. 7 seconds with a resolution of 21 um is outstanding.

Inspection with the high-resolution system cameras is carried out using the tried and tested modus AOI software. Our production process is certified under ISO 9000

Technical information


Camera Unit C42
  • Resolution 4 x 42 megapixels =168 megapixels (21456 x 7716 pixels) aspect ratio 2:3 per camera

  • RGB colour filter from CMOS sensor, colour intensity 24 bit

  • Seamless combining of 4 camera images (combination for 1 test plan) Automatic start by closing the drawer

  • DMC Code automatically detected

System-PC
  • Intel i9-9920X (12-core) 3.5 GHz,

  • 16GB DDR3-RAM,

  • 2 x 1 GB/s network interface,

  • I/O modules, 1 x 1 TB NVMe SSD,

  • 2 x 6 TB NAS HDDs SATA3,

  • Windows 10 Professional/LTSC 64 Bit,

  • Acronis backup software,

  • keyboard,

  • mouse,

  • operator keyboard,

  • 24” full HD IPS 16:9 monitor

Operating Range

FOV 480 mm x 200 mm

Inspection Speed

Image analysis including error calculation: 7 seconds typical.

PCB JIG for fixing device under test
  • Single system

  • Ergonomic vaccum frame fixture for the device under test

Dimensions and Weight
  • Camera unit (L*B*H): 39 x 39 x 40 mm

  • AOI box (L*B*H): 829 x 788 x 1011 mm

Connection values and Setting conditions
  • 230 V / 50 Hz P1 or 110 V / 60 Hz

  • Consumption: 300 W

  • Temperature: 5° C - 35° C

  • Humidity: 10 % - 80 % non-condensing

TEST POSSIBILITIES


  • Position and minimum thickness of the graphite coating in the central area
  • Checking the surfaces that should not be coated
  • Coating contamination (graphite/screenprint)
  • Testing of a defined target contour in screen print
  • Damage to the metal at the edge (balcony) of the workpiece
  • General damage such as deformation and scratche...